3-ton central heat pump · MAINLINE 15 SEER2 HP
Tempstar T4H5S36*K*AAA
Below average cooling and heating efficiency for a 3-ton central heat pump, but not rated for cold climates.
Ranks #302 of 302 3 ton central heat pumps for cooling efficiency, and costs about $1,203 a year to run in a mixed climate like Atlanta.
- SEER2
- 15.2 Cooling efficiency over a seasonBelow average · beats 6%
- HSPF2
- 7.8 Heating efficiency over a seasonBelow average · beats 5%
- EER2
- 12.5 Cooling efficiency on a 95°F dayVery good · beats 80%
- Heat at 5°F
- 16,500 BTU/h46% of its 47°F outputAverage · beats 58%
A good fit if…
- You want a certified 3-ton central heat pump at a typical efficiency level.
Think twice if…
- You often see nights below 0°F - it is not cold-climate certified.
- Cooling cost matters most - its SEER2 is below average for central heat pumps.
- You mainly need heat - its HSPF2 is below average for central heat pumps.
- You want the newest refrigerant - it uses R-410A, which is being phased down.
Details
Specifications
| General | |
|---|---|
| Brand | Tempstar |
| Outdoor unit model | T4H5S36*K*AAA |
| Series | MAINLINE 15 SEER2 HP |
| Type | Central heat pump |
| Nominal size | 3 ton |
| CompressorVariable-speed units run longer at low power | Single stage |
| Refrigerant | R-410A |
| Connected (smart) capable | No |
| On the market since | July 13, 2023 |
| Last certified | January 27, 2025 |
| Cooling | |
| SEER2Seasonal efficiency, higher is better | 15.2 (range 15.2) |
| EER2Efficiency at 95°F outdoors | 12.0-12.5 |
| Cooling capacity | 34,800-35,600 BTU/h |
| Heating | |
| HSPF2Seasonal efficiency, higher is better | 7.8 |
| Capacity at 47°F | 34,200-35,400 BTU/h |
| Capacity at 17°F | 20,400-21,200 BTU/h |
| Capacity at 5°F | 15,800-16,500 BTU/h |
| COP at 5°F2.0 = twice as efficient as a space heater | 2.10 |
| ENERGY STAR cold climate | No |
Heating output as it gets colder
Every heat pump delivers less heat as the outdoor temperature drops. Certified output of its matchup with EA*4X43L21A at the standard test temperatures, in BTU/h:
Certified matchups
The same outdoor unit scores differently with each indoor unit and furnace. Ask your installer for the AHRI reference number of the exact system you are quoted.
| Indoor unit | Furnace | SEER2 | EER2 | HSPF2 | Heat @5°F | AHRI ref. |
|---|---|---|---|---|---|---|
| EA*4X43L21A | *80ES(N,L)0902120A* | 15.2 | 12.5 | 7.8 | 15,800 | 210316831 |
| EA*4X43L21A | *95ESU0802120A* | 15.2 | 12.0 | 7.8 | 16,500 | 210315432 |
| EA*4X37L21A | *80ES(N,L)0902120A* | 15.2 | 12.0 | 7.8 | 15,800 | 210313465 |
| EA*4X37L21A | *95ESU0802120A* | 15.2 | 12.0 | 7.8 | 16,500 | 210312156 |
Yearly running cost in 10 large cities
- Phoenix, AZ$1,343/yr
- Miami, FL$1,099/yr
- Houston, TX$1,204/yr
- Atlanta, GA$1,203/yr
- Los Angeles, CA$1,167/yr
- New York, NY$2,855/yr
- Chicago, IL$2,314/yr
- Denver, CO$1,921/yr
- Seattle, WA$1,178/yr
- Minneapolis, MN$2,376/yr
At each state's average electricity price and the city's typical heating and cooling hours.
Questions
- What is the SEER2 rating of the Tempstar T4H5S36*K*AAA?
- The Tempstar T4H5S36*K*AAA is rated at up to 15.2 SEER2 and 12.5 EER2 for cooling and up to 7.8 HSPF2 for heating. The exact figure depends on the indoor unit it is paired with.
- Is the Tempstar T4H5S36*K*AAA good for cold climates?
- It is not cold-climate certified: none of its matchups meet the ENERGY STAR cold-climate criteria (a COP of at least 1.75 at 5°F among other limits). In places with frequent sub-zero nights, pick a cold-climate 3-ton model.
- How much does the Tempstar T4H5S36*K*AAA cost to run per year?
- At its rated efficiency it costs about $1,099-$2,855 a year in electricity in large U.S. cities, depending on climate and local rates - for example $1,343 in Phoenix and $2,376 in Minneapolis. The calculator on this page works it out for your city and compares it with your current system.
- Which indoor units work with the Tempstar T4H5S36*K*AAA?
- ENERGY STAR lists 4 certified combinations for this outdoor unit. The highest-rated ones use EA*4X43L21A, EA*4X37L21A.
- What refrigerant does the Tempstar T4H5S36*K*AAA use?
- It uses R-410A. R-410A is being phased down under the EPA AIM Act, and new systems are moving to R-454B and R-32.
Running cost and savings
Pre-filled with this model. Pick your city and what you heat with today; everything else is optional.
Similar 3 ton models
- OXBOX J5HP5036A1000AA15.2 SEER2 · 7.8 HSPF2
- Midea MOVA-36HN10-M152L15.2 SEER2 · 7.8 HSPF2
- Maytag PSH3BF4M2SX36K15.2 SEER2 · 7.8 HSPF2
- Mainline MPP15AZ36AJ2N15.2 SEER2 · 7.8 HSPF2
- Mainline MLP15AY36AJ2N15.2 SEER2 · 7.8 HSPF2
- Kenmore (C,H,T)4H5S36*K*AAA15.2 SEER2 · 7.8 HSPF2
- Guardian RHP15036B21 · cold climate15.2 SEER2 · 7.8 HSPF2
- Fujitsu FOP1536TJAYNA15.2 SEER2 · 7.8 HSPF2
See all 302 3 ton central heat pumps, ranked
Source: ENERGY STAR Certified Heat Pumps (U.S. EPA), certification of January 27, 2025. How we use the data.