HVAC Rated

9,000 BTU mini-split heat pump · Pro

Friedrich FPHFR09A3A

Below average cooling efficiency and average heating efficiency for a 9,000 BTU mini-split heat pump, and certified for cold climates.

Ranks #326 of 395 9,000 BTU mini-splits for cooling efficiency, and costs about $235 a year to run in a mixed climate like Atlanta.

SEER2
20.5 Cooling efficiency over a season
Below average · beats 24%
HSPF2
10.0 Heating efficiency over a season
Average · beats 43%
EER2
12.9 Cooling efficiency on a 95°F day
Average · beats 56%
Heat at 5°F
8,300 BTU/h92% of its 47°F output
Very good · beats 84%

A good fit if…

  • Your winters get properly cold - it is ENERGY STAR cold-climate certified, with 8,300 BTU/h at 5°F.
  • You want steady temperatures and quiet running - the compressor varies its speed.

Think twice if…

  • Cooling cost matters most - its SEER2 is below average for mini-splits.
  • You want the newest refrigerant - it uses R-410A, which is being phased down.

Calculate my running cost

Details

Specifications9,000 BTU, R-410A
General
BrandFriedrich
Also sold asAIR-CON, DIAL, Westinghouse
Outdoor unit modelFPHFR09A3A
SeriesPro
TypeMini-split heat pump
Nominal size9,000 BTU
CompressorVariable-speed units run longer at low powerContinuously variable
RefrigerantR-410A
Connected (smart) capableNo
On the market sinceApril 21, 2023
Last certifiedJune 9, 2026
Cooling
SEER2Seasonal efficiency, higher is better20.5 (range 18.0-20.5)
EER2Efficiency at 95°F outdoors12.0-12.9
Cooling capacity9,000 BTU/h
Heating
HSPF2Seasonal efficiency, higher is better9.0-10.0
Capacity at 47°F9,000 BTU/h
Capacity at 17°F6,500-7,200 BTU/h
Capacity at 5°F7,100-8,300 BTU/h
COP at 5°F2.0 = twice as efficient as a space heater2.10-2.26
ENERGY STAR cold climateYes
Heating output as it gets colder92% kept at 5°F

Every heat pump delivers less heat as the outdoor temperature drops. Certified output of its matchup with FPHFC09A3B at the standard test temperatures, in BTU/h:

Certified matchups2 indoor units

The same outdoor unit scores differently with each indoor unit. Ask your installer for the AHRI reference number of the exact system you are quoted.

Indoor unitSEER2EER2HSPF2Heat @5°FAHRI ref.
FPHFC09A3B FRIEDRICH · cold climate20.512.910.08,300205048197
FPHFD09A3A FRIEDRICH · cold climate18.012.09.07,100205048198
Same unit, other model numbers3

These model numbers have exactly the same certified ratings and matchups as the Friedrich FPHFR09A3A: the same equipment under another brand, or a variant code for voltage, colour or market. Everything on this page applies to them.

Yearly running cost in 10 large cities$207-$565

At each state's average electricity price and the city's typical heating and cooling hours.

Questions6
What is the SEER2 rating of the Friedrich FPHFR09A3A?
The Friedrich FPHFR09A3A is rated at up to 20.5 SEER2 and 12.9 EER2 for cooling and up to 10.0 HSPF2 for heating. The exact figure depends on the indoor unit it is paired with; across its 2 certified matchups SEER2 ranges from 18.0-20.5.
Is the Friedrich FPHFR09A3A good for cold climates?
Yes. At least one certified matchup meets the ENERGY STAR cold-climate criteria, delivering up to 8,300 BTU/h at 5°F with a COP of 2.26, so it is still 2.3 times as efficient as electric resistance heat at that temperature.
How much does the Friedrich FPHFR09A3A cost to run per year?
At its rated efficiency it costs about $207-$565 a year in electricity in large U.S. cities, depending on climate and local rates - for example $256 in Phoenix and $474 in Minneapolis. The calculator on this page works it out for your city and compares it with your current system.
Is the Friedrich FPHFR09A3A the same as the AIR-CON ASLCI4H4S09?
Yes, as far as the certified ratings go. ENERGY STAR lists 4 model numbers with identical efficiency, capacity and matchups, which means the same outdoor unit sold under a different brand or with a minor variant code (voltage, colour or region). The full list is on this page.
Which indoor units work with the Friedrich FPHFR09A3A?
ENERGY STAR lists 2 certified combinations for this outdoor unit. The highest-rated ones use FRIEDRICH FPHFC09A3B, FRIEDRICH FPHFD09A3A.
What refrigerant does the Friedrich FPHFR09A3A use?
It uses R-410A. R-410A is being phased down under the EPA AIM Act, and new systems are moving to R-454B and R-32.

Running cost and savings

Pre-filled with this model. Pick your city and what you heat with today; everything else is optional.

Heat pump $255/yrYou save $209/yrSee details ↓
1. Where you live
Adjust heating and cooling hours

Filled in from your city's climate. Change them if you run the system much more or less than usual.

2. The heat pump Friedrich FPHFR09A3A
3. What it replaces
4. Price replace the example with your quote
Heat pump, per year
$255
Current system, per year
$464
You save per year
$209
Payback
16.8 years
Net after 10 years
-$1,413

Cooling $155Heating $101Electricity used: 1,596 kWhSaved vs. a minimum-efficiency heat pump: $101

Estimates use the unit's rated SEER2 and HSPF2, full-load hours derived from NOAA 1991-2020 degree days, average residential electricity prices from the U.S. EIA (12 months to July 2026) and fuel prices from EIA (2025 for natural gas, week of 2026-10-05 for propane and heating oil). Very cold days that need backup heat are not modelled. Federal minimum for comparison: 14.3 SEER2 / 7.5 HSPF2.

Similar 9,000 BTU models

See all 395 9,000 BTU mini-splits, ranked

Source: ENERGY STAR Certified Heat Pumps (U.S. EPA), certification of June 9, 2026. How we use the data.