2.5-ton central heat pump · F-SERIES PLUS
Friedrich FRP15AZ30AJ2N
Below average cooling and heating efficiency for a 2.5-ton central heat pump, but not rated for cold climates.
Ranks #188 of 199 2.5 ton central heat pumps for cooling efficiency, and costs about $970 a year to run in a mixed climate like Atlanta.
- SEER2
- 15.2 Cooling efficiency over a seasonBelow average · beats 6%
- HSPF2
- 7.8 Heating efficiency over a seasonBelow average · beats 5%
- EER2
- 11.7 Cooling efficiency on a 95°F dayAverage · beats 43%
- Heat at 5°F
- 14,100 BTU/h50% of its 47°F outputBelow average · beats 39%
A good fit if…
- You want a certified 2.5-ton central heat pump at a typical efficiency level.
Think twice if…
- You often see nights below 0°F - it is not cold-climate certified.
- Cooling cost matters most - its SEER2 is below average for central heat pumps.
- You mainly need heat - its HSPF2 is below average for central heat pumps.
- You want the newest refrigerant - it uses R-410A, which is being phased down.
Details
Specifications
| General | |
|---|---|
| Brand | Friedrich |
| Outdoor unit model | FRP15AZ30AJ2N |
| Series | F-SERIES PLUS |
| Type | Central heat pump |
| Nominal size | 2.5 ton |
| CompressorVariable-speed units run longer at low power | Two-stage |
| Refrigerant | R-410A |
| Connected (smart) capable | No |
| On the market since | February 27, 2023 |
| Last certified | June 3, 2026 |
| Cooling | |
| SEER2Seasonal efficiency, higher is better | 15.2 (range 15.2) |
| EER2Efficiency at 95°F outdoors | 11.7 |
| Cooling capacity | 28,400 BTU/h |
| Heating | |
| HSPF2Seasonal efficiency, higher is better | 7.8 |
| Capacity at 47°F | 28,400 BTU/h |
| Capacity at 17°F | 19,700 BTU/h |
| Capacity at 5°F | 14,100 BTU/h |
| COP at 5°F2.0 = twice as efficient as a space heater | 2.00 |
| ENERGY STAR cold climate | No |
Heating output as it gets colder
Every heat pump delivers less heat as the outdoor temperature drops. Certified output of its matchup with FRH2TZ3617STANN at the standard test temperatures, in BTU/h:
Certified matchups
The same outdoor unit scores differently with each indoor unit. Ask your installer for the AHRI reference number of the exact system you are quoted.
| Indoor unit | SEER2 | EER2 | HSPF2 | Heat @5°F | AHRI ref. |
|---|---|---|---|---|---|
| FRH2TZ3617STANN | 15.2 | 11.7 | 7.8 | 14,100 | 213087939 |
Yearly running cost in 10 large cities
- Phoenix, AZ$1,077/yr
- Miami, FL$877/yr
- Houston, TX$965/yr
- Atlanta, GA$970/yr
- Los Angeles, CA$942/yr
- New York, NY$2,309/yr
- Chicago, IL$1,873/yr
- Denver, CO$1,556/yr
- Seattle, WA$955/yr
- Minneapolis, MN$1,925/yr
At each state's average electricity price and the city's typical heating and cooling hours.
Questions
- What is the SEER2 rating of the Friedrich FRP15AZ30AJ2N?
- The Friedrich FRP15AZ30AJ2N is rated at up to 15.2 SEER2 and 11.7 EER2 for cooling and up to 7.8 HSPF2 for heating. The exact figure depends on the indoor unit it is paired with.
- Is the Friedrich FRP15AZ30AJ2N good for cold climates?
- It is not cold-climate certified: none of its matchups meet the ENERGY STAR cold-climate criteria (a COP of at least 1.75 at 5°F among other limits). In places with frequent sub-zero nights, pick a cold-climate 2.5-ton model.
- How much does the Friedrich FRP15AZ30AJ2N cost to run per year?
- At its rated efficiency it costs about $877-$2,309 a year in electricity in large U.S. cities, depending on climate and local rates - for example $1,077 in Phoenix and $1,925 in Minneapolis. The calculator on this page works it out for your city and compares it with your current system.
- Which indoor units work with the Friedrich FRP15AZ30AJ2N?
- ENERGY STAR lists 1 certified combination for this outdoor unit. The highest-rated one uses FRH2TZ3617STANN.
- What refrigerant does the Friedrich FRP15AZ30AJ2N use?
- It uses R-410A. R-410A is being phased down under the EPA AIM Act, and new systems are moving to R-454B and R-32.
Running cost and savings
Pre-filled with this model. Pick your city and what you heat with today; everything else is optional.
Similar 2.5 ton models
- Daikin DH5SEA3010A15.2 SEER2 · 7.8 HSPF2
- Fujitsu FOP1530TJAYNA15.2 SEER2 · 7.8 HSPF2
- Carrier GH5SAN430**AA15.2 SEER2 · 7.8 HSPF2
- Heil H4H5S30*K*AAA15.2 SEER2 · 7.8 HSPF2
- Carrier 25SCA530A**3015.2 SEER2 · 7.8 HSPF2
- Kaden KOVH-30BAM152L15.2 SEER2 · 7.8 HSPF2
- AC Pro SPHP-M-1030BB15.2 SEER2 · 7.8 HSPF2
- Kenmore (C,H,T)4H5S30*K*AAA15.2 SEER2 · 7.8 HSPF2
See all 199 2.5 ton central heat pumps, ranked
Source: ENERGY STAR Certified Heat Pumps (U.S. EPA), certification of June 3, 2026. How we use the data.